Your panel, your ritual.
Welcome to the RENOVO family. Your complete guide to setting up, using and caring for your red light therapy panel.
Getting started
Set up your panel on a stable surface or mount it securely, allowing airflow around the rear fans.
Stand or sit 15–60 cm from the panel — closer for targeted use, further for a broader area.
Select your mode: Red (skin and surface), NIR (deeper tissue), or Red + NIR (combined).
Use for 5–20 minutes per area. Start with shorter sessions and build up.
Aim for 2–5 sessions per week. Consistency matters more than intensity.
Understanding your modes
Red Light
Targets surface tissue layers (approximately 1–2 mm depth).
Near Infrared (NIR)
Penetrates deeper tissue layers (approximately 5–10 mm depth).
Red + NIR
Combines both light types for a comprehensive whole-body session.
Select your mode using the rear controls or included remote, depending on your model.
Setup & installation
- For indoor use only.
- Place on a stable, flat surface or secure with the supplied mounting hardware.
- Allow clearance around rear fans; do not block ventilation.
- Keep away from water, moisture and direct heat.
- Plug directly into a wall outlet; do not use extension cords.
Refer to your specific panel's product page for exact dimensions, power and other model-dependent specifications.
Specifications & safety
General specifications
| Input voltage | 100–250V AC |
| Beam angle | 30° |
| Modes | Red / NIR / Red + NIR |
| Flicker | None |
| Warranty | 2 years |
Specifications vary by model; check the relevant product page for exact figures.
Safety guidelines
- Do not stare directly into the LEDs during operation.
- Eye protection is recommended, especially for facial use.
- Stop use immediately if discomfort occurs.
- Keep away from unsupervised children and pets.
- Do not open, modify or attempt to repair the unit.
Consult a healthcare professional before use if you:
- Are pregnant or breastfeeding.
- Have a light-sensitive skin condition.
- Take photosensitising medication.
- Have an implanted electronic medical device, such as a pacemaker.
Care, warranty & information
Cleaning & maintenance
- Power off and unplug before cleaning.
- Wipe with a dry or slightly damp microfibre cloth only.
- Avoid chemical cleaners, sprays and abrasives.
- Keep ventilation openings clear of dust and obstruction.
2-year limited warranty
Your RENOVO panel includes a 2-year limited warranty covering manufacturing defects under normal household use. The warranty does not cover damage caused by misuse, modification or incorrect installation. For warranty claims, email support@renovoaustralia.com.au. Your Australian Consumer Law rights remain unaffected.
Legal & regulatory information
This product is sold as a general wellness product. No therapeutic or medical claims are made or implied. Individual experiences may vary; perceived benefits are subjective and not guaranteed.
Regulatory status: Confirm the appropriate Therapeutic Goods Act / ARTG wording with qualified Australian regulatory advice before publishing this section.
Limitation of liability
To the extent permitted by law, RENOVO is not responsible for injury or loss resulting from misuse or failure to follow these instructions. Nothing in this manual excludes rights under Australian Consumer Law.